USG2100: Initializing Web Configurations

Secospace USG2100/2200/5100 BSR/HSR & USG2000/5000 (include USG2130, USG2210, USG5310)Configuration Guide-Web:

Upon your first login to the Web page, you need to initialize the Web page to realize basic

network communication.

Procedure

Step 1 Choose Wizard > Startup Wizard. Configure the host name, system time, Internet interface, and LAN interface.

After configurations in Startup Wizard are complete, LAN hosts can access the Internet through the device.

Step 2 Verify software version and license information.

1. Choose System > Dashboard > Status.

2. Check the current software version on the System Information plane.

You can access Software anytime to check the latest software version.

After the latest software version is downloaded.

3. In the License Information plane, check the current license authorization information.

Licenses may affect certain functions of the device. Therefore, check whether the current

license is consistent with the one purchased. If Deactivate is displayed in License State,

If the current authorization information is different from that in the purchase contract, see How to Obtain Technical Support to contact the technical support personnel.

Step 3 Upgrade the signature database.

The signature database of the device for monitoring viruses and behaviors can be upgraded sustainably from the online upgrade center. Generally, the signature database that you obtained for the first time is not the latest version. You can upgrade it online on the network.

Step 4 Back up the configuration file.

After configurations are initialized, click Save on the upper right of the page to save the current configurations. Then save the current configurations as another configuration file to restore configurations in the case of faults or compare configuration files for fault diagnosis in the future.

This operation is recommended each time you perform big changes on the device configurations.

----End