To ensure the
coordination with other devices, an accurate system time is required. How to
Configure System Time for USG2000/5000 include USG5320, USG5120, below we will tell you the steps:
Setting the Time Manually
Step 1 Choose System > Configuration > Time.
Step 2 Select Manually Set the Time in Configuration Mode.
Step 3 Set Time Zone and Date.
Step 4 Set System Time.
The system time
format is: HH:MM:SS (hour/minute/second). Click a time area and then the /
button on the right to adjust the system time.
Step 5 Click Apply.
----End
Synchronizing the Time with the Local System Time
After you
synchronize the time with the local system time, the device system time is
synchronized with
the system time of the terminal (the PC for login to the device).
Step 1 Choose System > Configuration > Time.
Step 2 Select Synchronize the Time with the Local System Time in Configuration
Mode.
Step 3 Click Apply.
----End
Synchronizing the Time with the NTP Server
After you
synchronize the time with the NTP server, the device system time is
synchronized with the system time of the NTP server. A NTP server is required
for this mode.
Step 1 Choose System > Configuration > Time.
Step 2 Select Synchronize the Time with the NTP Server in Configuration Mode.
Step 3 Set Time Zone.
Step 4 Optional: Set Date and System Time.
This configuration
is recommended. When NTP is normal, Date and System Time are obtained from the
NTP server. When NTP is abnormal, the device uses the Date and System Time manually
specified.
Step 5 Enter the IP address of the NTP server in NTP Server IP.
If you need to
enter multiple NTP server IP addresses, click View/Configure on the right after
you have applied the first NTP server. Enter the IP addresses of other NTP
servers. Click Add to complete the configuration.
Step 6 Click Apply.
没有评论:
发表评论